Puxing PX-328 Manuel d'utilisateur télécharger pdf

File No.: PUXING-PG-777 v.1.00

Date of Issue: 2008-06-30

Guide to Programming Radio Model PX-777

1. Install Procedures

1.1 Plug RS232 COM port of program cable to a Computer

1.2 Install the software from a CD-ROM

1) Double click “PX6IN1.EXE” file and click NEXT NEXT…to finish

(You may input any word as a Serial Number )

2) Click the software icon “PX6IN1” on desktop and select a Eng. Version

3) Select Product: Select PX-777/328 CH128 MSK+CCIR only (or select Ch128(V2))

Note:

1) Don’t select others, your radio may not have these features, the unfit software version may

damage your radio!

2) If you ensure your radio have a two tone paging function, you must use “PX777/328 CH128+2

TONE”.

4) After confirm the select, press OK to next step.

3) Connect the programming cable to your radio.

4) Select a communication port.

Right-click My Computer -> Properties -> Hardware -> Device Manager, to view the detailed

information. As shown in the below figure, COM1 is the communication port for RS232

programming cable.

1 2 3 4 5 6 7

Page 1

1 File No.: PUXING-PG-777 v.1.00 Date of Issue: 2008-06-30 Guide to Programming Radio Mode

2 5) Make sure your software is also in COM1 (Click Port to set the COM) 6) Turn on your radio and click READ to read the radio’s default fact

Page 3

3 3. List and describe of programming Menu Type: The radio’s model numbers Field: The radio’s frequency band Note: Not all bands are availa

Page 4

4PTT ID: Set ON to display PTT ID on radio’s LCD. BusyLock: Busy Channel/Tone Lockout, there are OFF, Carrier and QT/DQT option Off: This funct

Page 5

53.6 Beep: A tone to come with your operation. Enable: To activate alert tone for Low Power, Blank frequency, Power On and Pressing operation. Disabl

Page 6

6ID: “ID” is MSK PTT ID (At most Eight digitals) which will display on LCD after you release PTT Call ID: a tone in CCIR format (At most Eight digita

Page 7

7 7. Print Preview After programming you can click “FileÆPrint Preview” to check all setting before save or print out. 8. CTCSS/DCS list

Pas de commentaire

Puxing PX-328 Manuel d'utilisateur